TP-LINK ADSL2/2+ User Manual

 

 

34

)

If you want to make the rule take effect, please select Yes to active the rule. 

Step 3:  Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port 

Number” in the corresponding field. 

Step 4:  Select the Protocol as “TCP” and select the Unmatched rule as “Next”. 

Step 5:  Finally, click the SAVE to save the entry. 

Step 6:  Go to Step 2 to configure the next two rules: Block E-mail received by the IP address 

192.168.1.7 on your local network; Make the PC with IP address 192.168.1.8 unable to 

visit the website of IP address 202.96.134.12. 

)

After you complete the IP filter rules for the example, the Filter list will show as follows. You can 
enter the IP / MAC Filter Set Index to view the information about the rule. 

 

Other configurations for the entries as shown in Figure 4-27: 
Enter the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry. 

Enter the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, and 
then click the DELETE button to delete the entry. 

Select IP/Mac Filter as the Filter type, and select MAC as the Rule type (shown in Figure 4-28), 

then you can configure the filter rules based on MAC address.