Carrier Access 770-0125-AB User Manual

To change the state of the BVI to “up”, use the following PS commands:

PS#configure

PS(NSP-config)#interface bvi 1

PS(NSP-config-bvi)#no shutdown

To display the status of the BVI, use the following PS command:

PS#show BVI status [bridge-group number]

If you specify an optional [bridge-group number], only the BVI associated with the 
[bridge-group number]

 will be displayed. If you leave the [bridge-group number] 

field blank, all of the configured BVIs will be displayed.

The following sample output shows the show BVI status command results:

PS#show bvi status

BVI is configured for this bridge group

BVI is administratively enabled

MAC address of BVI is 00-02-35-00-ca-e8