Adder Technology CATxIP 1000 User Manual

This.page.provides.the.opportunity.to.configure.various.details.for.each.of.the.
host.systems.that.may.be.connected.to.the.AdderView.CATxIP.1000..Each.entry.
can.be.configured.with.a.name,.the.permitted.users,.the.hot.key.combinations.
required.to.switch.to.it.and,.if.required,.appropriate.power.control.commands.

1. Click.one.of.the.host.entries.to.reveal.a.Host.configuration.dialog..
. Note: Host computers connected to a cascaded AdderView unit will appear 

within the list (providing the ‘Add entry for unrecognised host’ option is 
ticked) and you can easily discern them from directly connected systems 
because their addresses will be four digits, rather than two...

Name
. Enter.the.name.that.will.be.displayed.in.the.viewer.window.when.you.

click.the.Host.button.

Users
. Select.the.users.that.will.be.permitted.to.connect.to.this.host..Either.

enter.

*

.to.allow.all.users.or.a.list.of.users.separated.by.commas.(e.g..

admin,.nigel,.preben,.steve).

Hotkey / KVM Port
. Declare.the.numeric.sequence.that.is.pressed.together.with.the.hotkeys.

(usually.Ctrl.+.Alt).to.select.this.host.system,.which.is.the.same.value.as.
the.KVM.port.number..

Power On
. Enter.the.code.required.to.make.an.attached.power.control.unit.apply.

power.to.the.selected.host..See.

.for.

details..

Power Off
. Enter.the.code.required.to.make.an.attached.power.control.unit.remove.

power.from.the.selected.host..See.

.for.

details.

2. Enter.the.required.information.in.each.field.
3. Click.the.OK.button.

1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Host.Configuration’.option.

. When.selected,.any.systems.visited.that.are.not.specified.in.the.Hosts.list,.will.

be.added.to.the.list..It.is.useful.to.tick.this.option.when.cascaded.systems.are.
first.added.to.the.installation.

. Removes.all.hosts.from.the.list..