APC 6000 User Manual
Page 38 -
6739389EN/FB
System information (continued)
The telephone number is
reinstated:
reinstated:
◗
on reception of a new
communication configuration using
the Soft Tunor after-sales-support
computer tool,
the Soft Tunor after-sales-support
computer tool,
◗
when the "GTCZ" or "GT2Z"
communication board is de-
energised.
energised.
Word address: C1
C10: call reset (0= not activated /
1=activated)
Call reset command issued by the
central telemonitoring site. The
information bits that provoked the
call to the central telemonitoring
site are reset.
1=activated)
Call reset command issued by the
central telemonitoring site. The
information bits that provoked the
call to the central telemonitoring
site are reset.
C11: return call (0= not activated
/ 1=activated)
Return call command issued by the
central telemonitoring site. The
UPS site recalls the central
telemonitoring site following a time
delay of approximately 30 seconds.
/ 1=activated)
Return call command issued by the
central telemonitoring site. The
UPS site recalls the central
telemonitoring site following a time
delay of approximately 30 seconds.
C14: status change reset (0= not
activated / 1=activated)
Indicates that the central
telemonitoring site issues a reset
command for the status change bit
at address 4EF.
activated / 1=activated)
Indicates that the central
telemonitoring site issues a reset
command for the status change bit
at address 4EF.