Trendnet Powerline Network Solution User Manual
To apply changes to Remote Devices through the Powerline Configuration Utility, you must enter the
Device Password (DPW) for each Remote Device located on the Device Label.
Device Password (DPW) for each Remote Device located on the Device Label.
If you have not already done so, please write down the 16-digit Device Password (DPW) and
corresponding MAC Address of each TPL-305E powerline adapter as this will be required to apply changes
to remote devices discovered in the utility. This is located on the Device Label, please refer to Section 1.4.
corresponding MAC Address of each TPL-305E powerline adapter as this will be required to apply changes
to remote devices discovered in the utility. This is located on the Device Label, please refer to Section 1.4.
Enter the 16-digit Device Password (DPW) for each Remote Device in the utility
1. Click one of the Remote Devices in the list.
2. Click Enter Password.
3. Type in the Device Password according to the corresponding MAC address. Then
2. Click Enter Password.
3. Type in the Device Password according to the corresponding MAC address. Then
click OK.
Remote
Devices
Devices
Powerline
adapters that
are connected to
the selected
Local Device
across the
electrical
system.
adapters that
are connected to
the selected
Local Device
across the
electrical
system.
Local
Device
Device
The closest
powerline
adapter(s)
that connects
your
computer to
the electrical
system.
powerline
adapter(s)
that connects
your
computer to
the electrical
system.
Rename
the
selected
Remote
Device
Enter the
Device
Password
(DPW) for the
selected
Remote
Device
Add a
Remote
Device that
was not
detected
Scans for
Remote
Devices that
were not
detected
detected
Closes the
utility
application.
Privacy Tab
Change the
Network
Name/Security Key
Network
Name/Security Key