Talkswitch 48-CA/CVA User Manual
T A L K S W I T C H C O N F I G U R A T I O N
3 7
Figure 35: Password dialog box
.
3. After entering, changing or deleting a password,
click File -> Save settings to TalkSwitch or click the middle icon in the
tool bar to save the settings.
tool bar to save the settings.
Figure 36: Save settings
New settings must be saved to the
TalkSwitch phone system to take effect.
A progress bar will show the data
exchange to the TalkSwitch unit.
It takes only a few seconds to
complete.
TalkSwitch phone system to take effect.
A progress bar will show the data
exchange to the TalkSwitch unit.
It takes only a few seconds to
complete.
2.2.2 IP Configuration
TalkSwitch 48-CVA requires an IP address to function properly. If you have a
TalkSwitch 48-CA, an IP address is required if you want to configure the
system remotely or if you want to network it with a CVA on a LAN. There are
two methods of configuring the IP settings, automatic and manual. The
automatic setting is the default. See Figure 37..System IP Settings section
The Obtain IP and DNS information automatically radio option is selected by
default. This selection refers to DHCP (Dynamic Host Configuration
Protocol). If you are on a DHCP server, the IP and DNS information will be
filled in automatically.
TalkSwitch 48-CA, an IP address is required if you want to configure the
system remotely or if you want to network it with a CVA on a LAN. There are
two methods of configuring the IP settings, automatic and manual. The
automatic setting is the default. See Figure 37..System IP Settings section
The Obtain IP and DNS information automatically radio option is selected by
default. This selection refers to DHCP (Dynamic Host Configuration
Protocol). If you are on a DHCP server, the IP and DNS information will be
filled in automatically.
1. Click the
next to System Information -> IP Configuration.