APC SYCF160KH User Manual
Configuration
System Settings
Set Up the Network
1.
Select Admin and press ENTER.
UPS
Alarms
Power Dist
Log
Switch Gear
→ Admin
Environment
Help
2.
Select Network Setup and press ENTER.
→ Network Setup
Local Interface
Date/Time
Device ID
Local Interface
Date/Time
Device ID
3.
Select Mode and press ENTER.
Stat:
→
→
Mode:
IP:
SM:
SM:
4.
Select Fixed IP Addr to give a specific IP
address to the UPS system or select one of the
other three methods to obtain an IP address. In
this example Fixed IP Addr mode is selected.
address to the UPS system or select one of the
other three methods to obtain an IP address. In
this example Fixed IP Addr mode is selected.
→
Fixed IP Addr
DHCP Only
BOOTP Only
DHCP & BOOTP
BOOTP Only
DHCP & BOOTP
5.
Select IP (Internet Protocol), SM (Subnet
Mask), and GW (GateWay) and change the
settings using the UP and DOWN arrow keys.
Press ENTER to confirm the changes.
Mask), and GW (GateWay) and change the
settings using the UP and DOWN arrow keys.
Press ENTER to confirm the changes.
→
IP:
→
SM:
→
GW:
20
Symmetra™ PX48, 96, and 160 kW 400 V 100 kW 208 V Operation
990–3015E-001