Benq SP840 User Manual
Maintenance
59
English
4.
Loosen the screws that secure the lamp.
•
Do not turn the power on with the lamp
cover removed.
cover removed.
•
Do not insert your fingers between the
lamp and the projector. The sharp edges
inside the projector may cause injuries.
lamp and the projector. The sharp edges
inside the projector may cause injuries.
5.
Lift the handle so that it stands up. Use
the handle to slowly pull the lamp out
of the projector.
Pulling it too quickly may cause the lamp to
break and scatter broken glass in the
projector.
break and scatter broken glass in the
projector.
•
Do not place the lamp in locations where
water might splash on it, children can
reach it, or near flammable materials.
water might splash on it, children can
reach it, or near flammable materials.
•
Do not insert your hands into the projector
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
6.
Insert the new lamp into the lamp
compartment and make sure it fits in
the projector.
Ensure the connectors are aligned.
If you experience resistance, lift the lamp and
start again.
start again.