Runco CL-500 User Manual

5. Menu

21

In this Menu, the global settings for the projector can be made.

There are 5 Menu Items: DEFAULT — LAMP TIMER — BACK LIGHT — AUTO OFF — LAMP HOURS. 

1.

DEFAULT: Load the default value of current input source.

2.

LAMP TIMER: Resets the lamp timer. This should only be done after the lamp has been replaced.

3.

BACK LIGHT: Turn on/off the Power ON Indicator.

4.

AUTO OFF: Set the auto shutdown timer. The setting timer is from 10 minutes to 3 hours.

5.

LAMP HOURS: This displays the number of hours the lamp has been used (the useable lifetime of the lamp is 1500 
hours). If the lamp hours exceed 1500, a warning message will be displayed on screen; when this happens, contact 
your Runco dealer for a new lamp.

This menu contains items necessary for installation.

There are 4 Menu Items included: LANGUAGE, MIRROR, KEYSTONE and SCREEN.  

1.

LANGUAGE: There are 3 languages that could be selected for the menus: English, French and Spanish.

2.

MIRROR: The projector could be installed on a ceiling or behind a screen, or with one or more mirrors. There are 
four settings: 

■

FLOOR FRONT

■

CEILING FRONT

■

FLOOR REAR

■

CEILING REAR

3.

KEYSTONE: Corrects for trapezoidal distortion as a result of the angle of projection (-12 ~ +12). This can correct 
for up to ± 12 degrees of offset.

4.

SCREEN: Select the right aspect ratio for your screen.

■

4 X 3                            

■ 

16 X 9