JVC DLA-SH4K User Manual

Setup

You can control this projector using a computer by
connecting the projector and computer to the network
(LAN).

Connection Example

NOTE:

● Use 100Base-TX (Category 5 and above) LAN cables.

Specifications of PC for
Controlling this Projector

NOTE:

● Make use of Internet Explorer Ver. 6.0.
● Windows is either registered trademark or trademark

of Microsoft Corporation in the United States and/or
other countries.

CAUTION:

● The PC specifications above are reference values for

the application software to run smoothly, and are not
intended to guarantee their operation.
Note that the applications may not run smoothly
depending on the condition of use of the respective
users even when the system requirements are
satisfied.

This sections describes the procedures when the IP
address is automatically assigned by the DHCP server.

Check to ensure that this projector is

connected to the DHCP server via a LAN
cable

Connect the supplied power cord to the

power input terminal of this projector

Insert plug into the power outlet on the wall

Remove the lens cap

Turn on the main power of the projector to

set to [I]

● The [STANDBY/ON], [LAMP], and [WARNING]

indicators light up for about 45 seconds, after which
the [STANDBY/ON] indicator turns red.

Launch the web browser on the computer

Connection Using a LAN
Cable

Windows XP Professional SP2
Windows XP Home Edition SP2

CPU

Pentium3 1 GHz or higher

Memory

256 MB and above

CONTROL

DVI 3

USB

LAN

RS-232C

STANDBY/ON

LAMP

WARNING

DVI 4

DVI 1

DVI 2

LAN1

WAN

LAN2 LAN3 LAN4

OPERATE I/

Router

(DHCP Server)

LAN

To Network
Terminal

To LAN

Terminal

Configuring the Network
Settings

Power Cord
(Supplied)

DLA-SH4_EN.book Page 20 Tuesday, January 15, 2008 6:07 PM