Hitachi CP-X2521WN User Manual

16

Use the supplied adapter cover to 
prevent the USB wireless adapter from 
coming off easily.

1. 

  

Loosen the screw (marked with 
triangle) on the bottom right of the 

 port.

2. 

Insert the tab of the cover into the 
hole at the upper left of the USB

 port in the direction of the 

arrow.

3. 

Align the screw holes on the 
projector and the cover. Then 

insert the screw removed from the 
projector into the hole and tighten 
the screw.

Using the security bar and slot

A commercially available anti-theft chain or 
wire can be attached to the security bar on 
the projector. Refer to the  gure to choose 
an anti-theft chain or wire.
Also this product has the security slot for 
the Kensington lock. 
For details, see the manual of the security 
tool.

►Do not use the security bar and slot to prevent the projector 

from falling down, since it is not designed for it.

WARNING

►Do not place anti-theft chain or wire near the exhaust vents. 

It may become too hot. 

CAUTION

• The security bar and slot is not comprehensive theft prevention 

measures. It is intended to be used as supplemental theft prevention measure.

NOTE

Setting up

Tab

Fastening the adapter cover

►Keep small parts away from children and pets. Take care not 

to put in the mouth. 

WARNING

18 mm

12 mm

18 mm

10 mm

Installation surface