Hitachi CP-X2521WN User Manual

37

IMAGE menu

Using the ◄/► buttons adjusts the vertical position.

Down Ù Up

• Over-adjusting the vertical position may cause noise to appear on 

the screen. If this occurs, please reset the vertical position to the 

default setting. Pressing the RESET button when the V POSITION 

is selected will reset the V POSITION to the default setting.

• When this function is performed on a video signal or an s-video 

signal, the range of this adjustment depends on OVER SCAN (

36) 

setting. It is not possible to adjust when OVER SCAN is set to 10.
•

 

This function is unavailable for a signal from the LAN, USB TYPE A, 

 or HDMI port.

Using the ◄/► buttons adjusts the horizontal position.

Right Ù Left 

• Over-adjusting the horizontal position may cause noise to appear on 

the screen. If this occurs, please reset the horizontal position to the 

default setting. Pressing the RESET button when the H POSITION is 

selected will reset the H POSITION to the default setting.

• When this function is performed on a video signal or an s-video 
signal, the range of this adjustment depends on OVER SCAN (

36) 

setting. It is not possible to adjust when OVER SCAN is set to 10.

• This function is unavailable for a signal from the LAN, USB TYPE A, 
USB TYPE B

 or HDMI por

t.

(continued on next page)