Hitachi 8755H User Manual

6

Adjusting the projector's elevator

When the place to put the projector is slightly uneven to 

the left or right, use the elevator feet to place the projector 

horizontally. 

Using the feet can also tilt the projector in order to project at a suitable angle to 

the screen, elevating the front side of the projector within 10 degrees.

This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is 

adjustable while pushing the elevator button on the same side as it.

. 

Holding the projector, push the elevator buttons to loose the elevator feet.

2. 

Position the front side of the projector to the desired height.

3. 

Release the elevator buttons in order to lock the elevator feet.

4. 

After making sure that the elevator feet are locked, put the projector gently.

5. 

If necessary, the elevator feet can be manually twisted to make more precise 

adjustments. Hold the projector when twisting the feet.

To loose an elevator foot, push the 

elevator button on the same side as it.

CAUTION  ►Do not handle the elevator buttons without holding the 

projector, since the projector may drop down.

►Do not tilt the projector other than elevating its front within 10 degrees using 

the adjuster feet. A tilt of the projector exceeding the restriction could cause 

malfunction or shortening the lifetime of consumables, or the projector itself.

To finely adjust, twist the foot.

10°