Star Micronics 150 User Manual
Programmer's Guide
PcOS Series 150
Control Codes
Printer Status Set/Inquire
12/14/99
Rev G
Page 63
Function
Inquire form position sensor status
ASCII
[ENQ] <6>
Hexadecimal
05H 06H
Decimal
<5> <6>
Function
Is the form position sensor detecting a form?
Serial/Parallel, IEEE 1284
Serial/Parallel, IEEE 1284
Parallel, non-IEEE 1284
Response
ACK <6> (06H 06H)
PE low
The position sensor is clear.
(No form present.)
NAK <6> (15H 06H)
(No form present.)
NAK <6> (15H 06H)
PE high
The form position sensor is
blocked. (There is a form.)
blocked. (There is a form.)
Function
Inquire form clamp status
ASCII
[ENQ] <7>
Hexadecimal
05H 07H
Decimal
<5> <7>
Function
Inquire whether the form clamp is closed
Serial/Parallel, IEEE 1284
Serial/Parallel, IEEE 1284
Parallel, non-IEEE 1284
Response
ACK <7> (06H 07H)
PE low
The clamp is closed.
NAK <7> (15H 07H)
NAK <7> (15H 07H)
PE high
The clamp is not closed.
(It is open or in jam position.)
(It is open or in jam position.)
Function
Is the buffer empty? Clear IEEE 1284 buffer.
ASCII
[ENQ] <9>
Hexadecimal
05H 09H
Decimal
<5> <9>
Function
This command allows the host to know when the print buffer is
empty. If IEEE 1284 is active, this command also clears the
response buffer.
Serial/Parallel, IEEE 1284
empty. If IEEE 1284 is active, this command also clears the
response buffer.
Serial/Parallel, IEEE 1284
Parallel, non-IEEE 1284
Response
ACK <9> (06H 09H)
PE low
The buffer is empty.
NAK <9> (15H 09H)
NAK <9> (15H 09H)
PE high
The buffer is not empty.