Toshiba EO1-33027E User Manual

Appendix 5          System Mode

99

Select the Control Code methods: “AUTO” (automatic selection),
or “ESC, LF, NUL” or “{,  ,}” or (manual selections).
After selecting the method, press the  PAUSE  key.

Select one of the following pulse motor speeds: AUTO or 104.
If selecting “AUTO”, the pulse motor cycle varies depending on
the operating temperature.  If “104” is selected, the pulse motor
cycle is fixed at 104%.
After selecting the pulse motor speed, press the  PAUSE  key.

Select one of the following Euro codes: FFH, FEH to B0H, B0H
to 21H or 20H.
After selecting the Euro code, press the  PAUSE  key.
The message returns to “PRINTER PARA”.

After “PRINTER PARA” appears, press the  FEED  key.

To make a fine adjustment of the pulse motor speed, press the
 PAUSE  key.

The acceptable values are -60 to +60.  As the value becomes lower,
the motor speed becomes faster.
After adjusting the pulse motor speed, press the  PAUSE  key.
The message returns to “<2> PARAMETER SET”.