Toshiba EO1-13016 User Manual

EO1-13016 

3.1 Front/Rear View

3- 1 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Lights when the power is turned on. 

 
ERROR LED (Red) 

The Error LED indicates an error by lighting or blinking.  
ON: 

Lights when an error is detected. 

OFF: 

No error is detected. (Normal state) 

 

Used to feed the receipt paper.  A touch of this button causes one line feed.  
Pressing and holding it feeds the paper continuously.  When the power switch is 
turned on while the [FEED] button is pressed and held, the printer will perform a 
self test print. 

 

The printer cover is 
open. ON 

ON 

When the printer cover is opened, the printer 
stops printing.  Closing the cover resumes 
printing.  

Paper near end 

ON ON 

This error indicates that the paper is nearly 
finished, but the printer keeps printing.  Load a 
new paper roll soon. 

Paper end 

ON ON 

When the paper has been used up, the printer 
stops printing.  Loading a new paper roll 
resumes printing.  

The print head is 
overheated. 

ON 

Blinks slowly 

When the print head is overheated, the printer 
stops printing.  Allow the printer to cool.  When 
the temperature becomes normal, the printer 
resumes printing automatically. 

Cutter motor is locked 
by jammed paper. 

ON 

Blinks slowly 

+ 

Blinks quickly 

When the cutter motor is locked, the printer stops 
the operation.  Removing the jammed paper 
resumes the operation.  

NOTE:  If other LED status except for the above occurs, turn the power off, and then on.  If this does 

not restore the LEDs, contact your nearest TOSHIBA TEC representative for assistance.  

Power Switch 

AC Adapter Box 

POWER

ERROR

FEED

 

Operation Panel 

Top Cover 

AC Adapter Box 

Printer Cover 

Ejector