SATO MB400i User Manual
22
Install the specialized AC adapter (optional) on the printer for use. The
label installation method differs by printing mode.
1. Remove the DC input terminal cover, and insert the DC output terminal
into the input terminal.
2. Connect the AC adapter to the outlet.
label installation method differs by printing mode.
1. Remove the DC input terminal cover, and insert the DC output terminal
into the input terminal.
2. Connect the AC adapter to the outlet.
•
Be sure to turn the printer power off before detaching the DC output
terminal for the AC adapter, or disconnecting the power supply.
terminal for the AC adapter, or disconnecting the power supply.
•
Note that disconnecting the power supply in ways other than
described above may prevent the printer from correctly storing any
settings in memory.
described above may prevent the printer from correctly storing any
settings in memory.
•
No battery pack is necessary when the AC adapter is used.
•
When the battery pack and AC adapter are used simultaneously,
charging begins if the battery is not fully charged. The display
becomes normal when fully charged (See the header, Charging by
installing the specialized AC adapter, optional, on the printer, in this
chapter, Preparing for First-time Operation).
charging begins if the battery is not fully charged. The display
becomes normal when fully charged (See the header, Charging by
installing the specialized AC adapter, optional, on the printer, in this
chapter, Preparing for First-time Operation).
DC output terminal
AC adapter
DC input terminal