Panasonic SV-P20U User Manual
45
-If the card containing print images is
inserted:
Turns off about 10 minutes later.
Turns off about 10 minutes later.
-If the card contains no print images:
Turns off about 5 minutes later.
≥Refer to page 48 when paper jam
occurs.
≥During printing, the paper moves forward
and backward several times. You can be
cut if you touch the paper during this
operation.
cut if you touch the paper during this
operation.
≥Printing in cold or hot temperatures may
take a little more time.
ª
Notes on Handling Finished
Prints
Prints
In order to preserve finished prints in the
best condition, observe the following
points. Failure to observe these points
could result in a deterioration of print
quality or injury.
≥Do not affix cellophane tape to the
best condition, observe the following
points. Failure to observe these points
could result in a deterioration of print
quality or injury.
≥Do not affix cellophane tape to the
printed surface. In particular, be careful
not to let plastic desk pads, business
card cases, or plastic erasers come into
contact with the printed surface.
not to let plastic desk pads, business
card cases, or plastic erasers come into
contact with the printed surface.
≥Rubbing the surface with a hard object
and scratching will cause surface flaws
or color fade-out.
or color fade-out.
≥Do not touch the printed surface with
your fingers.
≥Do not spill or apply volatile solvents
such as alcohol to the printed surface.
Doing so could result in discoloration or
fading.
Doing so could result in discoloration or
fading.
≥Do not leave printed surfaces in contact
with one another. Doing so could cause
color transfer between the two images.
Color transfer could also occur if a
printed surface is left in contact with any
other type of paper under pressure for an
extended period of time.
color transfer between the two images.
Color transfer could also occur if a
printed surface is left in contact with any
other type of paper under pressure for an
extended period of time.
≥Do not store prints under conditions of
high temperatures or high humidity.
Leaving prints under such conditions for
an extended period of time could cause
Leaving prints under such conditions for
an extended period of time could cause
a deterioration in print quality. Do not
leave prints exposed to direct sunlight.
leave prints exposed to direct sunlight.
ª
Optimal Use of the Battery
Battery Characteristics
This Battery is a rechargeable lithium ion
battery. Its ability to generate power is
based upon the chemical reaction that
takes place inside it. This reaction is
susceptible to the surrounding
temperature and humidity, and, if the
temperature is too high or too low, the
operating time of the Battery becomes
shorter. If the Battery is used in an
extremely cold environment, the possible
printing number may be reduced.
This Battery is a rechargeable lithium ion
battery. Its ability to generate power is
based upon the chemical reaction that
takes place inside it. This reaction is
susceptible to the surrounding
temperature and humidity, and, if the
temperature is too high or too low, the
operating time of the Battery becomes
shorter. If the Battery is used in an
extremely cold environment, the possible
printing number may be reduced.
The number of sheets that can be printed
with the supplied battery is as follows:
At a low temperature: approx. 10 sheets
At a high temperature: approx. 20 sheets
with the supplied battery is as follows:
At a low temperature: approx. 10 sheets
At a high temperature: approx. 20 sheets
If the Battery becomes extremely hot, a
protective function may operate, and the
Battery may become unusable for a while.
protective function may operate, and the
Battery may become unusable for a while.
Be Sure to Detach the Battery after Use
Be sure to detach the Battery from the
printer after use. (If it is left attached to the
printer, a minute amount of current is
consumed even when the printer power is
off.) If the Battery is left attached to the
printer for a long time, over discharge
takes place. The Battery may become
unusable after it is charged.
Be sure to detach the Battery from the
printer after use. (If it is left attached to the
printer, a minute amount of current is
consumed even when the printer power is
off.) If the Battery is left attached to the
printer for a long time, over discharge
takes place. The Battery may become
unusable after it is charged.
Disposing of an Unusable Battery
≥The Battery has a limited life.
≥Do not throw the Battery into fire
≥The Battery has a limited life.
≥Do not throw the Battery into fire
because it may cause an explosion.
P20U.book 45 ページ ２００３年１月７日 火曜日 午後３時１０分