Panasonic KX-P7305 User Manual
Network
Network
Setup in NetWare
47
This chapter explains how to setup a client computer to print via a NetWare server.
Perform the following steps:
Step 1: Setting up the printer and server
Step 2: Setting up the client
Step 2: Setting up the client
Step 1: Setting up the printer and server
There are four ways of setup.
• [A] Using NDS (Novell Directory Service) - PSERVER mode
• [B] Using NDS - RPRINTER (NPRINTER) mode
You may need to check with your network administrator which to select. For detailed
information on these modes, refer to the NetWare manual or the Novell web site.
information on these modes, refer to the NetWare manual or the Novell web site.
Setting the NetWare server is almost performed on the client. You must log on the server
using the supervisor privilege. Novell Client software must be installed in your computer prior
to setting up.
using the supervisor privilege. Novell Client software must be installed in your computer prior
to setting up.
Setup in NetWare
In NetWare 4.x / NetWare 5.x / NetWare 6