Edimax Technology PS-1201 User Manual

ping <IP Address>

For example, a PrintSir with the following

configuration:

Node ID: 0000B4010101

(the Node ID is printed on the rear side

of the PrintSir)

Assign IP address: 203.66.191.12

arp

–s 203.66.191.12 00-00-B4-01-01-01

ping 203.66.191.12

At the mean time, PrintSir’s IP will “temporarily”

be set to 203.66.191.12 (will restore after reboot).

Therefore, you need to run your web browser to set a

permanent IP address (refer to section 8.3.7 for detailed

IP configuration).

6.3.2 DHCP

There are many Unix systems that support DHCP

protocol, and the procedures to configure the DHCP

server database are different. This manual does not

describe the DHCP server configuration on the Unix

systems. It is highly recommended that the DHCP

server should be located on the same network as the

PrintSir.

6.3.3 BOOTP

If you have the BOOTP daemon, bootpd, running

on your UNIX system that is accessible by the PrintSir,

you can use the BOOTP protocol to set up the IP

address of the PrintSir. We recommend that the BOOTP