Ericsson 7700 User Manual

CLEANING ERROR

AUTOMATIC HEAD 
CLEANING FAILED
RETRY?
YES
NO

Head cleaning did not clear the 
nozzles.

Press 

 to clear the error and run the 

head cleaning utility again. If cleaning 
doesn’t start, cancel printing from the 
computer. Then turn the printer off and back 
on again.

CLEANING ERROR
NOT ENOUGH INK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO

There is not enough ink to 
perform cleaning. 

Select Yes and replace the cartridge (see 
page 157).

CLEANING ERROR
NOT ENOUGH EMPTY 
SPACE IN MAINT TANK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO

There is not enough space in 
the maintenance tank to 
perform cleaning. 

Select Yes and replace the maintenance 
tank (see page 166).

COMMAND ERROR

CHECK DRIVER SETTINGS

You may be using the wrong 
printer driver.

Damaged data was sent to the 
printer or the data has an 
incorrect command.

Press 

 to cancel the print job and reset 

the printer. Make sure you installed the 
correct driver for your printer. 

CUTTER UNIT NEARING 
END OF SERVICE LIFE. 
RECOMMEND REPLACING 
THE CUTTER UNIT

The paper cutter may be dull.

Replace the paper cutter; see page 162.

FRONT COVER OPEN

CLOSE FRONT COVER

Front cover is open.

Close the front cover. 

F/W INSTALL ERROR

UPDATE FAILED RESTART 
THE PRINTER

Firmware update failed.

Restart the printer, then update the 
firmware again; see page 55. 

INK CARTRIDGE

INK LOW REPLACE INK 
CARTRIDGE

The ink cartridge is expended.

Replace the ink cartridge; see page 157.