Epson SQ-850 User Manual

After stacking paper in the cut sheet feeder, be sure that the 

light is lit. When the printer is on line, a new sheet of

paper loads automatically whenever a printable character or

line feeding command is sent to the printer. Subsequent sheets

are automatically loaded as needed.

Note: Be sure that you run the self test described earlier in

this chapter the first time you use the cut sheet feeder and

whenever you change to a different paper size.

In the cut sheet feeder mode, the 

light goes off while

the next sheet of paper is being fed, but the printer remains on

line.
When the selected paper bin is empty, the printer automatically

goes off line and the 

light goes on. To resume

printing, stack more paper, then press the 

button.

If you turn off your printer during a paper out or

paper jam condition, any data remaining in the printer’s

buffer is discarded.

To operate the cut sheet feeder from the control panel when the

printer is in cut sheet feeder mode, be sure that the printer is

off line.

Press this button to feed the paper one line, or

hold it down to feed the paper continuously.