Epson T5270 User Manual

Epson SureColor T-Series User’s Guide

The printer can emulate

*

 HP-GL/2 (compatible with 

HP Designjet 750C) and HP RTL. 

When you want to print with applications using 
HP-GL/2 or HP RTL output, configure the output 
equipment as shown below according to your model. 

O

T7270/T7270D/T5270/T5270D

HP Designjet 750C C3195A

O

T3270

HP Designjet 750C C3196A

When you will print while emulating HP-GL/2 and HP 
RTL, observe the following points. 

O

Select Paper Type setting

Set one of the following options for the Select 
Paper Type

 setting of the printer. If other paper 

types are used, print quality may be reduced. 

Singleweight Matte/Plain Paper/Tracing 
Paper/Tracing Paper <Low Duty>

O

HP-GL/2 Settings

When you will print while emulating HP-GL/2 and 
HP RTL, set the Print Settings as follows: On the 
printer, select Setup menu > Printer Setup > 
HP-GL/2 Settings

. 

Explanations in this section use a typical method to 
switch automatically to the appropriate roll paper for 
the print job. 

For example, when you use the following method 
often, if you use the settings described below, the 
printer can switch between Roll 1 and Roll 2 
automatically in accordance with the paper type. 

You use different types of paper depending on the 
purpose of its use. For example you print to plain paper 
for drawings for in-house checks and print to color 
print paper for presentations and drawings for clients. 

In this example, the paper is loaded as follows. All 
paper has the same width. 

Roll 1: Plain Paper

Roll 2: Singleweight Matte Paper

1

Using the control panel of the printer, confirm 
Type Match

 is set in Setup menu > Printer 

 >  Roll Paper Setup > Roll Switch 

 > Paper Type. 

The default Paper Type setting is Type Match. 
If the setting has not been changed, the setting is 
Type Match

. 

U

2

Open the Printer Settings tab of the printer 
driver and confirm that Source is Roll Auto - 
XXXXX

. 

XXXXX indicates the width of the roll paper 
currently in use. 

*

Not all functions are supported. If you will use an 
untested application, test its output in advance. 

For a list of applications that have been tested, visit the 
Epson website at 

http://www.epson.com

.

c