Epson LQ-1150 User Manual
Troubleshooting
4-3
4
n = on,
f = flashing
•••
= short series of beeps (three beeps)
• • • • • = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the corresponding
function is not available.
The printer beeps once if you press a control panel button when the corresponding
function is not available.
f Paper Out
n Pause
•••
Continuous paper is not fed back to the
standby position.
standby position.
Tear off the printed document at the
perforation; then press the Load/Eject button.
The printer feeds the paper to the standby
position. Press the Pause button to turn off the
Pause light, if necessary.
perforation; then press the Load/Eject button.
The printer feeds the paper to the standby
position. Press the Pause button to turn off the
Pause light, if necessary.
•••
A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet.
Then press the Pause button to turn off the
Pause light, if necessary.
Then press the Pause button to turn off the
Pause light, if necessary.
•••
Paper is jammed in the printer.
Clear the paper jam as described in the
previous page.
previous page.
f Pause
–
The print head is overheated.
Wait a few minutes; the printer resumes printing
automatically once the print head has cooled.
automatically once the print head has cooled.
f All the lights
on the control
panel
on the control
panel
• • • • •
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
Panel light
state
state
Beep
pattern
pattern
Problem
Solution