Epson 440 User Manual
Chapter 3 Disassembly and Assembly
Rev. A
3-5
3.2.1
Housing Removal
Since the EPSON Stylus Color 600 has no lower housing as previous EPSON printers, the printer
mechanism can be taken out by only removing the upper housing.
1.
mechanism can be taken out by only removing the upper housing.
1.
Open the printer cover and set the PG adjust lever on the right-hand side to (+) position.
2.
Remove 4 screws (No.2) and remove the upper housing.
WORK POINT
Pull the front end of the upper housing while lifting up the upper housing to remove it.
CAUTION
Be careful not to pinch the cables with the posts of the upper housing when reinstalling it. (Especially
with the cables from the motors and doing so causes fatal damage to the mechanism and the electric
circuitry.)
with the cables from the motors and doing so causes fatal damage to the mechanism and the electric
circuitry.)
Upper Housing
Figure 3-2. Housing Removal