Epson A381H User Manual
PictureMate Snap (PM 240)
2 -
PictureMate Snap (PM 240)
8/06
Mechanical
Electrical
Note: Check the label on the bottom of PictureMate for voltage
information.
information.
AC Adapter
Environmental
Memory Card Slots
Computer USB Interface
External Device Interface
*
Not all USB devices are supported.
Safety Approvals
Paper path
Sheet feeder, top entry
Sheet feeder capacity
20 sheets
Dimensions
Storage
Width: 8.5 inches (215 mm)
Depth: 6.0 inches (152 mm)
Height: 5.7 inches (145 mm)
Width: 8.5 inches (215 mm)
Depth: 6.0 inches (152 mm)
Height: 5.7 inches (145 mm)
Printing
(with paper support and output tray open)
Width: 8.5 inches (215 mm)
Depth: 13.3 inches (339 mm)
Height: 10.3 inches (261 mm)
(with paper support and output tray open)
Width: 8.5 inches (215 mm)
Depth: 13.3 inches (339 mm)
Height: 10.3 inches (261 mm)
Weight
5.3 lb (2.4 kg) without photo cartridge,
AC adapter, or optional battery
AC adapter, or optional battery
Printable area
Border printing: 0.12 inch (3 mm) margin on
all sides of the paper
Borderless printing: no margins
Input voltage range
110 to 120 V or 220 to 240 V
Power consumption (approximate)
Printing
19.0 W
Sleep mode
4.0 W
Powered off
0.4 W
Model
A381H
Rated voltage
AC 100 to 240 V
Input voltage range
AC 90 to 264 V
Rated frequency
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.4 to 0.8 A
Rated electrical power
42 W
Output
20 VDC, 1.68 A
Temperature
Operation: 50 to 95 °F (10 to 35 °C)
Storage: –4 to 140 °F (–20 to 60 °C)
1 month at 104 °F (40 °C)
Storage: –4 to 140 °F (–20 to 60 °C)
1 month at 104 °F (40 °C)
Humidity
Operation: 20 to 80% RH
Storage (in shipping container): 5 to 85% RH (without
Storage (in shipping container): 5 to 85% RH (without
condensation)
Card slots
CF Type II card slot
Compatible with “CF+ and
CompactFlash
CompactFlash
™
Specification 2.0”
Sony Memory Stick
®
/
MemoryStick PRO
™
/
Duo (requires adapter)
card slot
card slot
Compatible with “Memory
Stick Standard version
1.40-00”
Compatible with “Memory
Stick Standard Memory
Stick PRO Format
Specifications version
1.01-00”
Stick Standard version
1.40-00”
Compatible with “Memory
Stick Standard Memory
Stick PRO Format
Specifications version
1.01-00”
SD
™
(Secure Digital)/
MMC
™
(MultiMediaCard
™
) card
slot
Compatible with “SD
Memory Card Specifications
/ PART1. Physical Layer
Specification Version 2.0”
Compatible with
“MultiMediaCard System
Specifications Version 3.31
cards”
Memory Card Specifications
/ PART1. Physical Layer
Specification Version 2.0”
Compatible with
“MultiMediaCard System
Specifications Version 3.31
cards”
xD-Picture Card
™
slot
Compatible with
“xD-Picture Card Card
Specification Version 1.20
Type M Card/Type H Card”
“xD-Picture Card Card
Specification Version 1.20
Type M Card/Type H Card”
Voltage
requirements
requirements
3.3 V
3.3 V/5 V combined use
Maximum current is 500 mA
3.3 V/5 V combined use
Maximum current is 500 mA
Connectivity
Universal Serial Bus Specifications Revision 2.0
Universal Serial Bus Specifications Revision 1.1
Universal Serial Bus Specifications Revision 1.1
Bit rate
480 Mbps (High speed device)
Connector type
USB Series B
Data Encoding
NRZI
Recommended
cable length
cable length
Less than 6 feet (1.8 meters)
Connectivity
Universal Serial Bus Specifications Revision 2.0*
Bit rate
480 Mbps (High speed device)
Connector type
USB Series A
Data Encoding
NRZI
Recommended
cable length
cable length
Less than 6 feet (1.8 meters)
Safety
UL 60950-1
CSA C22.2 No. 60950-1
CSA C22.2 No. 60950-1
EMC
FCC part 15 Subpart B class B
CSA C108.8 Class B
CSA C108.8 Class B