Panasonic KX-MC6040CX User Manual
1. Introduction and Installation
14
Detailed operating instructions are on the CD-ROM.
3
Close the document cover.
1.7.2 Using the automatic document feeder
1
Insert the document (up to 50 pages) FACE UP into
the feeder until a single beep is heard.
the feeder until a single beep is heard.
2
Adjust the width of the document guides (
1) to fit
the actual size of the document.
Volume
1.8 Adjusting the volume
Important:
L
Before adjusting the volume, set the operation
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
Ringer volume
1. Press {V} or {^} repeatedly to select “
Ringer
Volume”.
2. Press {<} or {>}.
To turn the ringer OFF
1. Press {V} or {^} repeatedly to select “
Ringer
Volume”.
2. Press {<} repeatedly to display “
Ringer Off” in
the status bar.
L
The unit will not ring.
L
To turn the ringer back ON, press {>}.
Monitor volume
1. While using the monitor, press {V} or {^}
repeatedly to select “
Monitor Volume”.
2. Press {<} or {>}.
Initial Programming
1.9 Date and time
1
{
Menu} i {#}{1}{0}{1} i {Set}
2
Enter the current date/month/year/hour/minute.
Press {*} repeatedly to select 12-hour time entry or
24-hour time entry.
Press {*} repeatedly to select 12-hour time entry or
24-hour time entry.
L
If you selected 12-hour time entry, press {V} or
{^}
{^}
repeatedly to select “
AM” or “PM”.
Example: 10 August, 2008 10:15 PM (12 hour
clock format)
clock format)
1. Press {V} or {^} repeatedly to select “
Date”.
i {<} / {>}
2. Press {1}{0} {0}{8} {2}{0} {0}{8}.
D:10/M:08/Y:2008
3. {Set}
4. Press {V} or {^} repeatedly to select “
Time”.
i {<} / {>}
5. Press {*}, then press {1}{0} {1}{5}.
6. Press {V} or {^} repeatedly to select “
PM”.
10:15PM
7. {Set}
3
Press {Menu} to exit.
1.10 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
so that it appears on the top of each page sent.
1
{
Menu} i {#}{1}{0}{2} i {Set}
2
Enter your logo, up to 30 characters using the dial
keypad. i {Set}
keypad. i {Set}
3
Press {Menu} to exit.
1.11 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
Menu} i {#}{1}{0}{3} i {Set}
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {Flash}.
L
To erase a number, press {Back}.
3
{
Set}
4
Press {Menu} to exit.
1.12 Configuring the unit to
access the LAN
access the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
1
MC6040_6260CX-PNQW1377ZA-QRG-en.book Page 14 Wednesday, July 30, 2008 10:24 AM