Panasonic DP-1820P User Manual
10
Getting To Know Your Machine
INV
INV
LTR
LGL
LDR
LTR
LDR
LDR
INV
LTR
LGL
LTR
LGL
INV
LTR
INV
INV-R
LTR-R
LGL
LDR
Width Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Indicator
Paper Tray
∗
∗∗
∗∗
Hold the guides by the center when
adjusting the width
adjusting the width
Operation Chart
If set in other
function mode
(DP-1820P/1820E
only)
function mode
(DP-1820P/1820E
only)
Face Up
A B C
From
ADF/i-ADF
(Option)
ADF/i-ADF
(Option)
From
Platen
Platen
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
the Invoice area and select
Invoice.
or
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Load Paper: Face Up
Paper Weight: 16 - 24 lb
Paper Capacity: 550 Sheets (20 lb)
Paper Weight: 16 - 24 lb
Paper Capacity: 550 Sheets (20 lb)
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Original Guides
■ Quick Operation Chart
NOTE:
When changing the paper size,
refer to page 54.
When changing the paper size,
refer to page 54.
1
1
2
3
Adding Paper
Turn the Power
Switch to the
ON position
Switch to the
ON position
Original Guides∗
∗∗
∗∗
Adjust to the
original's width
original's width
Tray
(Max. 50 Letter
size originals)
size originals)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
LGL: Legal, LDR: Ledger
4
4
Load Paper
(Do not exceed limit guides)
Paper Weight: 15-35 lb
Paper Capacity: 50 sheets/20 lb
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
(Do not exceed limit guides)
Paper Weight: 15-35 lb
Paper Capacity: 50 sheets/20 lb
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
NOTE:
Make sure that the paper is set
properly and that it does not exceed
the Max. Level indicator.
properly and that it does not exceed
the Max. Level indicator.
2
1
2
3