FARGO electronic M10 User Manual
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
46
Resolving problems with streaks in Prints
Symptoms: Scratches or lines travel the entire length of the printed card.
Step Procedure
1
Symptom: There may be dust on the Printhead.
2
Symptom: There may be a scratch or a burned out element in the Printhead.
Contact the authorized reseller for technical assistance.
Contact the authorized reseller for technical assistance.
Resolving problems with Print blotches or small voids
Symptoms: There are small spots on the print with no ink or different colors of ink.
Step Procedure
1
Most likely due to dust inside the Printer.
2
Symptom: May also be caused by dust or embedded contaminants on the card.
Be sure the cards you are using are clean and stored in a dust free environment.
Some card stocks can have embedded contaminants in their polished surface
and should not be used. Only use card stock recommended for use with the
Card Printer.
Some card stocks can have embedded contaminants in their polished surface
and should not be used. Only use card stock recommended for use with the
Card Printer.
3
Symptom: May also be caused by a filthy Cleaning Roller.