Panasonic DP-C263 User Manual

Page of 62
13
 Chapter 2    Scan/Email Operations
Push on the slot cover to open it.
Insert a PCMCIA/PC card into the PCMCIA/
PC Card slot as illustrated. (Label side up)
7
Select “PC Card”.
z
Only one storage device can be selected at 
a time. When the “PC Card” is selected as a 
storage device, the scanned image cannot 
be saved to the SD Memory Card, or Hard 
Disk Drive at the same time.
z
If the setting of Function Parameter “84 SD/
PC Card Function
” (General Settings > Key 
Operator) is set to “No”, the Confirmation 
screen displays an “Function not available
error message and beeps.
If you do not touch any key for 3 seconds, or 
select “Close” on the touch panel display, the 
machine will display the previous screen. 
For more details, refer to General Settings in 
the Operating Instructions (For Function 
Parameters) on the provided CD-ROM.
8
Press the Start key.
The scanned image is saved into the 
PCMCIA/PC Card.
The scanned data is saved on the following 
directory of the memory card.
z
Directory: 
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z
The data saved on the memory card in the 
PC Card Adapter can be printed by this 
machine or another DP-C354, DP-C264, 
DP-C323, DP-C263 or DP-C213. For more 
details, refer to Printing from SD Memory 
Card/PC
 in the Operating Instructions (for 
Basic Operations). When printing PDF data, 
or high-compression PDF data, install and 
set up the Memory Card Print Utility. For 
details, refer to the Help of the Memory Card 
Print Utility on the Document Management 
System CD-ROM.
9
Push the Eject button on the right side 
of PCMCIA/PC Card slot, and then 
remove the PCMCIA/PC Card Adapter.
z
Do not remove the PCMCIA/PC Card while 
the Access Indicator is flashing.
10
Close the Slot Cover.
z
When canceling the operation, press the Stop key 
on the Control Panel, and then select “Yes” on the 
Touch Panel Display.
Eject button