Printronix T4204 User Manual
IGP/PGL Submenu
107
Skip Command Prefix
This parameter determines if the printer will print any data before a PGL
command is received.
command is received.
•
Enable. The printer ignores all data before an IGP command.
•
Disable. The printer will print all data before an IGP command.
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when the printer
is powered on.
is powered on.
•
Enable. The PGL is enabled when the printer is powered on. (The PGL
feature is initialized in the Normal mode.)
feature is initialized in the Normal mode.)
•
Disable. The PGL is disabled when the printer is powered on. (The PGL
feature is initialized to the Quiet mode.)
feature is initialized to the Quiet mode.)
Extended Execute Copy
•
Disable. Dynamic data, overlay data, etc. are not allowed if the optional
Form Count parameter (number of forms to print) is specified as part of
the Execute command. (This setting is IGP-100 compatible.)
Form Count parameter (number of forms to print) is specified as part of
the Execute command. (This setting is IGP-100 compatible.)
•
Enable. Dynamic data, overlay data, etc. are allowed within a form in
which the Form Count parameter is specified in the Execute command. In
this case, the exact same form (with identical dynamic data) is printed for
whatever the Form Count is. However, incremental data is not
incremented since the page that is printing is exactly the same, the
overlay data is only printed with the first form and not subsequent forms,
and each form is printed on a separate page.
which the Form Count parameter is specified in the Execute command. In
this case, the exact same form (with identical dynamic data) is printed for
whatever the Form Count is. However, incremental data is not
incremented since the page that is printing is exactly the same, the
overlay data is only printed with the first form and not subsequent forms,
and each form is printed on a separate page.