Printronix T4204 User Manual
90
Chapter
3
Menu Options
ETHERNET PARAMETERS Menu
The ETHERNET PARAMS menu is available only when the Printronix
PrintNet option is installed. This menu is for configuring your printer for
network operation.
PrintNet option is installed. This menu is for configuring your printer for
network operation.
For information on assigning the IP Address, Gateway Address, Subnet Mask
and MAC Address, refer to the
and MAC Address, refer to the
PrintNet User’s Manual.
You may also enable or disable the Novell or NetBIOS Protocols within this
menu, as well as selecting which Novell Frame scheme is used in processing
Novell signals. See the Novell chapter in the
menu, as well as selecting which Novell Frame scheme is used in processing
Novell signals. See the Novell chapter in the
PrintNet User’s Manual for more
details.
If the printer is connected to a Printer Manager utility, the PPM Port number
and PPM Port Timeout settings must match the settings in the Printer
Manager program. See the appropriate
and PPM Port Timeout settings must match the settings in the Printer
Manager program. See the appropriate
Printer Manager manual for details.
ETHERNET
PARAMS
(from page 54)
IP Address
Gateway
Address
Subnet Mask
MAC Address
Novell
Protocol
NetBIOS
Protocol
xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx hhhhhhhhhhhh Enable*
Disable
Enable*
Disable
Disable
* = Factory Default
Novell Frame
PPM Port
Number
PPM Port
Timeout
Auto Sensing*
Ethernet II
Ethernet 802.2
Ethernet 802.3
802.2 Snap
Ethernet II
Ethernet 802.2
Ethernet 802.3
802.2 Snap
3001*
(0-65535)
(0-65535)
100 secs.*
(1-255)
(1-255)