Philips 5900 User Manual

118

AXIS 5900 User’s Manual

Invoke the print server’s Web interface to enable the SNMPv3 protocol.

1. Select 

Admin | Network Settings | Detailed View | TCP/IP Network and 

ensure that 

HTTPS Enabled is set to yes to guarantee a secure 

configuration.

Note: You must have a valid certificate loaded to be able to enable HTTPS. 
See 

2. Select 

Admin | Network Settings | Detailed View | SNMP and set SNMPv3 

Enabled to yes.

3. Create an 

initial user by entering two new passwords: one authentication 

password and one privacy password. Each password must consist of at least 
8 characters.

4. Click the 

Create initial user button.

Now your print server is ready to accept communication according to the 

SNMPv3 protocol. For further management you will need an SNMPv3 

management application; you use this application to configure the print 

server, to create new user accounts and to control access to it. Also see 

To update the initial user, select Admin | Network Settings | Detailed View 

| SNMP, enter the two passwords (one for authentication and one for privacy) 
and click the 

Update initial user button.