Philips 5900 User Manual

AXIS 5900 User’s Manual

15

Before you begin, configure the WLAN settings on your workstation / 

laptop as described below (refer to the user documentation of your WLAN 

network interface for instructions):

•

Select 

•

Set  the 

SSID to AXIS followed by the last 6 digits of the serial number 

which is found on the underside label of the Axis Network Print Server 
(example: AXIS181636). The SSID is case sensitive and must be entered 
exactly as stated, i.e. in upper-case letters.

•

Set  the 

WLAN channel to 11 (channel 14 in Japan).

•

Disable

 the WEP parameter.

Proceed with the following:

•

To establish communication with the network, an IP address must be 
assigned to your Axis Network Print Server. See 

•

Once the connection has been established, proceed with creating a 
certificate. See 

•

Next,  activate https in the print server for secure Web services, such as 
WEP. See 

•

Set  the 

WLAN Network Mode and enter the SSID, WLAN channel and 

WEP keys according to your network. See 

•

The Axis Network Print Server must be restarted for the WLAN settings 
to take effect. Disconnect and reconnect the Axis Network Print Server 
Power Adapter to restart the AXIS 5900.

Once the print server’s connection to the network has been 
established and verified, you can reset the workstation / laptop to 
its original settings i.e. the network mode, SSID, WLAN channel 
and WEP keys.