Lexmark 4026-0XX User Manual
4026-0XX
Diagnostic Information 2-43
Toner on backside of printed page
Note: Toner on the back of the printed page can be caused by poor
fusing, improper development, or incorrect charging.
fusing, improper development, or incorrect charging.
2
Toner Car-
tridge
tridge
Replace the toner cartridge if the cartridge is
nearing the end of life.
nearing the end of life.
3
Transfer
Assembly
Assembly
Check the transfer roll for toner buildup and con-
tamination. Clean the transfer roll by performing
POST two or three times.
tamination. Clean the transfer roll by performing
POST two or three times.
Light print or black vertical streaks can be
caused by an open transfer leakage current cir-
cuit. Check the transfer roll right side contact,
TFR board lead and the TFR Leakage board
(PWB-T) for damage or poor contact.
caused by an open transfer leakage current cir-
cuit. Check the transfer roll right side contact,
TFR board lead and the TFR Leakage board
(PWB-T) for damage or poor contact.
If light print is still a problem, replace the follow-
ing FRUs one at a time in the order shown:
ing FRUs one at a time in the order shown:
HVPS
Transfer Assembly
TFR Leakage board PWB-T
Engine board
FRU
Action
1
Fuser Assem-
bly
bly
Check the hot roll and backup roll for toner
buildup. Clean or replace as necessary.
buildup. Clean or replace as necessary.
If the fuser assembly is clean and functioning
correctly, replace the following FRUs one at a
time in the order shown:
correctly, replace the following FRUs one at a
time in the order shown:
HVPS
Engine board
FRU
Action