Lexmark C736 Series User Manual

You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and

print photos.

Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with your camera.

Insert the other end of the USB cable into the USB port on the front of the printer.

Make sure the PictBridge-enabled digital camera is set to the correct USB mode. See the camera

documentation for more information.

If the PictBridge connection is successful, then a confirmation message appears on the printer display.

Follow the instructions on the camera to select and print photos.

Note: If the printer is turned off while the camera is connected, then you must disconnect and then reconnect the

camera.

To print samples of the fonts currently available for your printer:

Make sure the printer is on and Ready appears.

From the printer control panel, press  .

Press the down arrow button until  Reports appears, and then press  .

Press the down arrow button until  Print Fonts appears, and then press  .

Press the down arrow button until   appears next to PCL Fonts or PostScript Fonts, and then press

.

After the font sample list prints, Ready appears.

Printing