Lexmark 637 User Manual

0, 10–225 seconds

Set the amount of time it takes for a network print job to be canceled.

90 seconds is the factory default setting.

A setting value of 0 disables the timeout.

If a value between 1 and 9 is selected, then Invalid appears on the
display, and the value is not saved.

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > TCP/IP

Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Note: This menu is available only in network printers or printers that are attached to print servers.

Set the current TCP/IP hostname.

View or change the current TCP/IP address.

Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

View or change the current TCP/IP netmask.

View or change the current TCP/IP gateway.

On
Off

Specify the DHCP address and parameter assignment.

Note: On is the factory default setting.

On
Off

Specify the RARP address assignment setting.

Note: Off is the factory default setting.

On
Off

Specify the BOOTP address assignment setting.

Note: On is the factory default setting.

Yes
No

Specify the Zero Configuration Networking setting.

Note: Yes is the factory default setting.

Yes
No

Send files to the printer using the built

‑in FTP server.

Note: Yes is the factory default setting.

Yes
No

Enable the built-in Web server (Embedded Web Server) which lets you monitor and
manage the printer remotely using a Web browser.

Note: Yes is the factory default setting.

View or change the current WINS server address.

Understanding the printer menus

140