Lexmark 41H0050 User Manual
Use the
To
8
Home button
Go to the home screen.
9
Indicator light
Check the status of the printer.
•
Off—The printer is off.
•
Blinking green—The printer is warming up, processing data, or printing.
•
Solid green—The printer is on, but idle.
•
Blinking red—The printer requires operator intervention.
10
USB port
Connect a flash drive to the printer.
Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For more information,
see “Avoiding jams” on page 201 and “Storing paper” on page 128.
see “Avoiding jams” on page 201 and “Storing paper” on page 128.
Setting the paper size and type
1
From the printer control panel, navigate to:
> Settings >
> Paper Menu >
> Paper Size/Type >
2
Press the up or down arrow button to select the paper tray or feeder, and then press
.
3
Press the up or down arrow button to select the paper size, and then press
.
4
Press the up or down arrow button to select the paper type, and then press
to change the settings.
Configuring Universal paper settings
The Universal paper size is a user
‑defined setting that lets you print on paper sizes that are not preset in the printer
menus.
Notes:
•
The smallest supported Universal size is 76.2 x 127 mm (3 x 5 in.) and is loaded only in the multipurpose feeder.
•
The largest supported Universal size is 215.9 x 1219.2 mm (8.5 x 48 in.) and is loaded only in the multipurpose
feeder.
feeder.
From the printer control panel, navigate to:
> Settings >
> Paper Menu >
> Universal Setup >
> Units of Measure >
> select unit of
measure >
Using C746x
48