Lexmark 34S0100 User Manual
2
Lift and pull the unit containing the photoconductor kit and the toner cartridge out of the printer. Set the unit aside
on a flat, clean surface.
on a flat, clean surface.
Warning—Potential Damage: Do not touch the photoconductor on the underside of the photoconductor kit. Use
the cartridge handle whenever you are holding the cartridge.
the cartridge handle whenever you are holding the cartridge.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
component, allow the surface to cool before touching.
3
Remove the jammed paper.
Note: If the paper is not easy to remove, then open the rear door to remove the paper.
4
Align and reinstall the unit.
Clearing jams
100