Konica Minolta Network Printer User Manual

Key Operator Mode 9-11

Key Operator Mode

ECM (Electronic Copy Monitor) Function Setting [4] (continued)

How to Access the ECM Setting Mode

Key Operator Mode Screen

ECM Master Key Code Screen

ECM Setting Menu Screen 

1 Press [

HELP

] to display the Help Screen, then touch 

. 

Enter the 4-digit Key Operator password, then touch 

 to display the Key Operator 

Mode Screen. (See note 1.)
If the Key Operator password is not valid, check with your service representative. 

2 Touch 

. The ECM Master Key Code Screen displays if a code 

is required.

3 Use the keypad on the touch screen to enter your 8-digit ECM master key code, then 

touch 

 to display the ECM Setting Menu Screen. (See note 2.)

4 Select the desired ECM function, and make settings as required. 

To exit the ECM mode, touch 

 on ECM Setting Menu Screen.

5 Touch 

 on the Key Operator Mode Screen to return to the Basic Screen.

NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.

2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code. The ECM 

master key code can be set to less than 8 digits by the Memory switch setting of the Key Operator 
function.