Konica Minolta Network Printer User Manual

Key Operator Mode 9-31

Key Operator Mode

Control Panel Adjustment [10]

Use this feature to check the LCD touch screen and realign the position of touch sensors 
that may have shifted.

Key Operator Mode Screen 

Control Panel Adjustment Screen

1 Press [

HELP

] to display the Help Screen, then touch 

. 

Enter the 4-digit Key Operator password, then touch 

 to display the Key Operator 

Mode Screen. (See note.)

2 Touch 

 to display the Control Panel Adjustment Screen.

3 Touch the “+” symbol at the upper right corner, then lower left corner on the screen. The 

present coordinates will be displayed in the message area of the screen.

4 Check that the X coordinate and Y coordinate displayed in the first line of the message 

area fall within the standard value displayed in the second line.

5 Touch the 

s at the upper left and lower right corners on the screen to 

check if the buzzer tone functions normally.

6 If the coordinates fall out of the range of the standard value in step 4, or the buzzer tone 

does not sound in step 5, repeat the adjustment procedure from 3 to 5 or contact your 
service representative.

7 Press [1] of the control panel keypad to restore the Key Operator Mode Screen.
8 Touch 

 to return to the Basic Screen and perform printing operations.

NOTE: If an invalid password is entered, enter the valid 4-digit password.