Konica Minolta Network Printer User Manual

 

Konica Force 65 Overview (continued)

 

3-4 Machine Information

 

Machine Information

 

Service Settings

 

Setting changes for the following functions can be made by your service representative.

 

In the default condition, the Force 65 will produce unlimited sets. If required, your service 
representative can set the printer to stop printing when the number of prints exceeds 
specified capacity.

 

Your service representative can set a 4-digit Key operator password to access the Key 
Operator Mode Screen. 

After this setting is made, a Password Entry Screen will be displayed when Key Operator 
mode is selected from the Help Screen. The user or Key Operator will be required to enter 
the valid Key Operator password before accessing the Key Operator Mode Screen. It is 
recommended that the Key Operator password be noted and kept in a secure place in the 
event it is forgotten. Otherwise, you will be required to contact your service representative 
to obtain a password.

 

Your service representative can set a 4-digit Weekly timer 

 

 to enable the 

key operator to gain access to the Weekly Timer Setting Menu Screen. 

After this setting is made, the Weekly Timer Master Key Code Screen will be displayed and 
will always require entry of the set Weekly timer master key code to access the Weekly 
Timer Setting Menu Screen. 

Your service representative can set the weekly timer system to display the Weekly timer 
key on the Help Screen which enables you to view Weekly timer settings.

 

Staple capacity is changeable, and may be set to 45, 40, or 35 by your service 
representative.

 

Your service representative can set the printer message area to display “ADD TONER” 
when the toner supply is low, or “PM CALL” when preventive maintenance is required.