KYOCERA C5025N User Manual
Using the Operator Panel
2-82
ADVANCED OPERATION GUIDE
Resource Protection
Resource protection preserves these PCL resources in memory so that
they remain intact even when you have switched back in PCL 6.
they remain intact even when you have switched back in PCL 6.
NOTE:
Resource protection requires extra memory to store the
downloaded fonts and macros. The total size of the printer memory
recommended for using the resource protection option is affected by
several factors. See Expansion Memory Modules on page 3-3.
recommended for using the resource protection option is affected by
several factors. See Expansion Memory Modules on page 3-3.
1
Press [MENU].
2
Press
U or V repeatedly until Others >
appears.
3
Press
Z.
4
Press
U or V repeatedly until >Resource
Prot
. appears.
5
Press [OK] ([ENTER]). A blinking question
mark (?) appears.
mark (?) appears.
6
Press
U or V to select Permanent or Perm / Temp (Permanent/
Temporary) for resource protection.
7
When the desired resource protection is displayed, press [OK] ([ENTER]).
8
To exit the menu selection, press [MENU].
Alarm (Buzzer) Setting
You can set an alarm sound in addition to the message displayed when the
paper supply is exhausted, or when paper jamming occurs. This setting is
useful, for example, when the printer is located some distance from the
user.
paper supply is exhausted, or when paper jamming occurs. This setting is
useful, for example, when the printer is located some distance from the
user.
The audio alarm is set to On when leaving the factory. If the alarm is set to
Off
Off
, it will not sound.
Others >
>Resource Prot.
Permanent
>Resource Prot.
? Permanent