KYOCERA C5025N User Manual

The following indicators light during normal operation and whenever the 
printer needs attention. Depending on the status of lighting, each indicator 
has the following meaning:

The operator panel keys are used to configure the printer operation. Note 
that certain keys have a secondary function.

The printer has a USB, parallel (FS-C5030N), network, and an 

optional interface. Configuration of the printer settings affect only the 
interface that is currently active (shown by the INTERFACE indicator on 
the message display). See Interface Indicator (INTERFACE) on page 2-5

GO switches the printer between on-line and off-line. Use this key to:

•

Toggle the printer’s on-line and off-line states. You can temporarily 
stop the print job by switching the printer off-line.

•

Print and feed out one page when the printer displays Waiting.

Flashing. Indicates an error that you can resolve. For 
details, see the Troubleshooting section in the 
Operation Guide.
On. Indicates that the printer is ready and on-line. The 
printer prints the data it receives.
Off. Indicates that the printer is off-line. Data can be 
received but will not be printed until the printer is 
switched on-line by pressing [GO]. Also, indicates 
when printing is automatically stopped due to an error 
condition. For details see the Troubleshooting section 
in the Operation Guide.

Flashing. Indicates that a data is being received.
On. Indicates either that data received is being 
processed before printing starts, or that data received 
is being written to a memory card, hard disk or RAM 
disk.

Flashing. Indicates that the printer requires 
maintenance or is warming up.
On. Indicates the occurrence of a problem or an error. 
For details, see the Troubleshooting section in the 
Operation Guide.