KYOCERA C5025N User Manual

the installed optional paper feeders (from the top most paper cassette to 
the bottom paper cassette):

MP tray

Cassette 1

Cassette 2

Cassette 3

Cassette 4

Cassettes 2

, 3 and 4 are available for selection when the optional paper 

feeders are installed.

When the desired paper source is displayed, press [OK] ([ENTER]).

To exit the menu selection, press [MENU].

Using the optional duplexer, you can automatically print on both sides of 
the paper. The duplexer is mounted underneath the printer.

Duplex printing is available for the following paper types:

Plain

Preprinted

Bond

Recycled

Rough

Letterhead

Color

Prepunched

High quality

Activating the duplexer is done by selecting either short edge or long edge 
binding mode.

To use this function, the optional duplexer must be installed on 

the printer.
Duplex printing can be also performed from the MP tray. When the MP 
tray is set to First Mode (First), the paper size and paper type will be the 
same as those of the paper cassette currently set at the paper feed 
source. If the paper to be fed from the MP tray does not match the paper 
size and paper type of the current paper feed source cassette, a paper 
jam may occur.

Binding refers to the manner in which printed pages of paper are joined 
together (by gluing, stitching, etc.) in book form. The two possible types of 
binding are: long-edge binding, in which pages are joined together along 
their long edge; and short-edge binding, in which they are joined together 
along their short edge. In selecting a binding type, you must also consider