Seiko Group FB 380 User Manual
13
7
Align the paper with the print start position.
Ensure the tractor paper is in line with the print start position. If the paper is not
aligned with the print start position, release the tractor lock levers of the left and
right tractors, align the paper, and then fasten the lock lever to lock the tractors.
Ensure the tractor paper is in line with the print start position. If the paper is not
aligned with the print start position, release the tractor lock levers of the left and
right tractors, align the paper, and then fasten the lock lever to lock the tractors.
Tearing off Tractor Paper
To tear off the paper, make sure that printed-paper is fed to the front table. If not, turn offline then
press PARK/LOAD key.
Hold the edge of paper and pull it to the edge of the window cover as shown in Figure 3-10.
If the perforation of the paper is not at the edge of the window cover, adjust the tear-off position
(refer to chapter 5, Control Panel)
press PARK/LOAD key.
Hold the edge of paper and pull it to the edge of the window cover as shown in Figure 3-10.
If the perforation of the paper is not at the edge of the window cover, adjust the tear-off position
(refer to chapter 5, Control Panel)
Figure 3-10 Tractor paper tear-off