Scanport 1200SF User Manual
8
Standard telephone and FCC
Notices
These notices are in effect
on models sold and used in
the United States only
When programming emergency numbers or
making test calls to emergency numbers:
making test calls to emergency numbers:
Remain on the line and briefly explain to the
dispatcher the reason for the call before hanging
up.
dispatcher the reason for the call before hanging
up.
Perform these activities in the off-peak hours, such
as early morning or late evening.
as early morning or late evening.
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA. On
the backside of this equipment is a label that contains,
among other information, a product identifier in the
format US: AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
You may safely connect this equipment to the
telephone line by means of a standard modular jack,
USOC RJ11C.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this
product. It is designed to be connected to a
compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed
five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total
RENs, contact the local telephone company. The
REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX.The digits
represented by ## are the REN without a decimal
point (e.g., 06 is a REN of 0.6). For earlier products,
the REN is separately shown on the label.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted service.
rules and the requirements adopted by the ACTA. On
the backside of this equipment is a label that contains,
among other information, a product identifier in the
format US: AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
You may safely connect this equipment to the
telephone line by means of a standard modular jack,
USOC RJ11C.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this
product. It is designed to be connected to a
compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed
five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total
RENs, contact the local telephone company. The
REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX.The digits
represented by ## are the REN without a decimal
point (e.g., 06 is a REN of 0.6). For earlier products,
the REN is separately shown on the label.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance that temporary discontinuance of service
may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this
happens the telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for
repair or warranty information, please contact Ricoh
Americas Corporation CUSTOMER SUPPORT
DEPT. at 1-800-FASTFIX.
If the equipment is causing harm to the telephone
network, the telephone company may request that
you disconnect the equipment until the problem is
resolved.
Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation commission
for information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable your
alarm equipment. If you have questions about what
will disable alarm equipment, call your telephone
company or a qualified installer.
If you are not able to solve a problem with your
machine, please contact RICOH CORP. CUSTOMER
SUPPORT DEPT. at 1-800-FASTFIX.
repair or warranty information, please contact Ricoh
Americas Corporation CUSTOMER SUPPORT
DEPT. at 1-800-FASTFIX.
If the equipment is causing harm to the telephone
network, the telephone company may request that
you disconnect the equipment until the problem is
resolved.
Connection to party line service is subject to state
tariffs. Contact the state public utility commission,
public service commission or corporation commission
for information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable your
alarm equipment. If you have questions about what
will disable alarm equipment, call your telephone
company or a qualified installer.
If you are not able to solve a problem with your
machine, please contact RICOH CORP. CUSTOMER
SUPPORT DEPT. at 1-800-FASTFIX.
Warning
• For protection against the risk of electrical shock,
always disconnect all cables from the wall outlet
before servicing, modifying or installing the
equipment.
before servicing, modifying or installing the
equipment.
• This equipment may not be used on coin service
lines provided by the telephone company or
connected to party lines.
connected to party lines.
• Ricoh cannot accept any financial or other
responsibilities that may be the result of your use
of this information, including direct, special or
consequential damages. There are no warranties
extended or granted by this document.
of this information, including direct, special or
consequential damages. There are no warranties
extended or granted by this document.
• This machine has been certified to comply with
FCC standards, which are applied to the USA
only. A grounded plug should be plugged into a
grounded AC power outlet after checking the
rating of the local power supply for the machine to
operate properly and safely.
only. A grounded plug should be plugged into a
grounded AC power outlet after checking the
rating of the local power supply for the machine to
operate properly and safely.