Emulex Single Channel 2Gb/s Fibre Channel PCI Express HBA LP1050EX-E LP1050EX-E Leaflet

ANSI Fibre Channel: 
FC-FS, FC-PH, FC-PI, FCP, FCP-2, FC-AL,  
FC-PLDA, FC-MI, FC-FLA, IETF IP over FC 

PCI Express Base Spec 1.0a 
PCI Express CEM Spec 1.0a 
PCI Express to PCI/PCI-X 
Bridge Spec 1.0 

Fibre Channel Class 2 and 3 

PHP hot plug—hot swap

Emulex LightPulse® technology 

2Gb/s or 1Gb/s FC Link 

Quad Data Rate (QDR) SRAM Unified Data 
Buffer and Code Space memory

16 Buffer–to–Buffer Credits supported

1K+ Contexts Cached Onboard

Windows Server 2003

Windows 2000 

NetWare 

Linux (open build and open source) 

x86 and Intel® Itanium® processor family 

PCIe 1.0a compliant @ 2.5 Gb/s

data rates: 1.0625/2.125Gb/s (auto–detected) 

optics: short wave lasers with LC  
type connector

cable: 

 

50/125µm, up to 300 meters at 2Gb/s 
62.5/125µm, up to 150 meters at 2Gb/s

 

standard height, half length x4 lane card

111.15mm x 167.65mm (4.376" x 6.600")

standard bracket

Corporate HQ 3535 Harbor Blvd Costa Mesa CA 92626 714 662.5600 | Wokingham U.K. (44) 118 977 2929 | Paris France (33) 41 91 19 90 | Beijing China (86 10) 6849 9547

A rich suite of software complements the 
LightPulse LP10000 family of enterprise and 
midrange-class Fibre Channel HBAs. Setup 
programs like Enterprise AutoPilot Installer 
streamline the installation of HBA drivers 
and management applications to a few 
simple commands, and provide customizable 
scripting capabilities for both interactive and 
automated installations. As a centralized 
management suite, HBAnyware incorporates 
agent technology that provides discovery,  
reporting and management of local and 
remote HBAs with both in-band Fibre Chan-
nel and out-of-band IP support, enabling 
sophisticated management capabilities such 
as remote firmware upgrades and advanced 
diagnostics from a single console anywhere 
in the SAN.  

All Emulex device drivers are fully compat-
ible with previous generations of Emulex 
host bus adapters. A single driver binary 
supports all Emulex HBAs on a given host 
platform, streamlining the management 
of device drivers in environments with 
multiple generations and versions of HBAs, 
simplifying the upgrade process, and pro-
viding investment protection.

POWER & ENVIRONMENTAL 
REQUIREMENTS 

volts: +3.3 and 12 VDC

power:  
x4 lane link 15.7/22.3 watts (typical/max)

airflow required: 100 lf/m 

storage temperature: 
-40° - 70°C (-40° - 158°F) 

relative humidity:  
5% to 95% non–condensing

Class 1 Laser Product per DHHS 21CFR (J)  
& EN60825 

UL recognized to UL 60950-1 

CUR recognized to CSA22.2, No. 60950-1-03 

TUV certified to EN60950 

FCC rules, Part 15, Class A 

ICES–003, Class A 

EMC Directive 89/336/EEC (CE Mark) 

  - EN55022, Class A 

  - EN55024 

Australian EMC Framework (C–Tick Mark) 

  - AS/NZS 3548, Class A 

VCCI, Class A 

MIC (Korea), Class A 

BSMI (Taiwan), Class A

LP1050Ex-F2 
Single channel, embedded multi-mode  
optic interface

This document refers to various companies and products by their trade 
names. In most, if not all cases, their respective companies claim these 
designations as trademarks or registered trademarks. This information 
is provided for reference only. Although this information is believed to 
be accurate and reliable at the time of publication, Emulex assumes no 
responsibility for errors or omissions. Emulex reserves the right to make 
changes or corrections without notice.

06-379   3/06