Fujitsu FTP-621DCL013 User Manual

■

This thermal printer (driven by 24 VDC) and cutter provide high
speed printing for 2-inch wide paper (60 mm). This printer is
small in size, light weight, and has low power consumption.
The print head is designed with open construction for easy
maintenance.

This printer is suitable for a variety of applications, such as
POS terminals, ticket machines, label printers, measuring
devices and medical equipment.

In addition to the interface board, a driving LSI (MCU + Gate
Array) is also available.

■

It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components'  unique head drive control system.

Full or partial cutting are available by normal or reverse
rotation of the motor (command set).

The peak current for head driving is approximately 2.2 A (at
50 mm/s printing speed, 50% printing ratio).

Open head construction makes head maintenance easy,
especially for head cleaning.

The thermal paper can be loaded without  head-up lever
operation.

8 dots/mm head provide clear print output.

Front or rear insertion types are available.

1