HP (Hewlett-Packard) C100 User Manual

C100_110-160_180.FB    1  Tue Jul 16 06:36:50 1996

Your upgrade kit contains a Main Tray Assembly, which, when installed,
upgrades your Model C100/110 to a Model C160/C180.

Installing this upgrade in your Model C100 or Model C110 does not affect the
regulatory and safety classifications or approvals. The upgraded system meets all of
the regulatory and safety standards listed in Appendix A of your original Model
C100/110 Owner’s Guide.

The following sections provide step-by-step instructions for removing the
C100/110 main tray and power supply and installing the C160/C180 CPU
main tray and power supply.

The general steps are outlined as follows. See the individual sections for
more detailed instructions.

The following steps must be followed in the order in which they appear. Refer to the
individual sections of this guide for the actual step-by-step procedures for upgrading
the C100/110 to a C160/180.

•

Update your operating system software to HP-UX 10.20.

•

Determine the LAN ID of your system.

•

Run the cclass_upgrade program.

•

Power off the workstation and any peripherals and unplug the power cords. Dis-
connect any peripheral cables and remove the floor stand.

•

Remove the main tray assembly.

•

Remove the memory boards from the CPU board and the option boards from the
main tray and reinstall them onto the new main tray.

•

Place the main tray assembly into the workstation chassis.

•

Connect power cords and cables, restart the workstation, and enter the LAN ID
when prompted.